DeLonghi ECAM37X.95 Instructions For Use Manual page 22

DISPLAYED MESSAGE
PRESS OK TO CLEAN OR TURN
DIAL
TURN MILK FROTH
ADJUSTMENT DIAL TO CLEAN
POSITION
CLEAN
TURN FROTH ADJUSTMENT
DIAL
DESCALING NEEDED
PRESS OK TO START
(~45MIN)
REPLACE WATER FILTER
PRESS OK TO START
POSSIBLE CAUSE
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position.
:
Milk has been delivered recently and the tubes
inside the milk container (E) must be cleaned.
The milk container has been inserted with
the froth adjustment dial (E1) in the CLEAN
position.
The machine must be descaled.
The water softener filter (D7) is exhausted.
REMEDY
To proceed with the CLEAN function, press the
selector corresponding to "OK", or turn the froth
adjustment dial to one of the milk positions.
Turn the froth adjustment dial (E1) to CLEAN
(fig. 19).
Turn the dial to the required froth position.
Press the selector corresponding to "OK" to
start descaling or "ESC" to descale later. The
descaling procedure described in section "14.
Descaling" needs to be performed.
Press the selector corresponding to "OK" to re-
place or remove the filter, or "ESC" to carry out
the procedure later. Follow the instructions in
section "16. Water softener filter".
22