uuIndicatorsu
Indicator
Name
Turn Signal and
Hazard Warning
Indicators
Lights On Indicator
High Beam
Indicator
Auto High-Beam
Indicator
System Message
Indicator
94
On/Blinking
• Blinks when you operate the turn signal
lever.
• Blinks along with all turn signals when you
press the hazard warning button.
• Comes on when the parking, tail, and
other external lights are on.
• Comes on when the high beam headlights
are on.
• Comes on when all the operating
conditions of the auto high-beam are met.
• Comes on along with a beep when a
problem is detected. A system message on
the driver information interface appears at
the same time.
Explanation
●
Does not blink or blinks rapidly - Have your
vehicle checked by a dealer.
2 Light Switches P. 168
—
2 Auto High-Beam P. 172
While the indicator is on, roll the right selector
●
wheel to see the message again.
2 Switching the Display P. 112
Refer to the Indicators information in this chapter
●
when a system message appears on the driver
information interface. Respond to the message
accordingly.
●
The driver information interface will not return to
the normal screen unless the warning is canceled,
or the right selector wheel is rolled.