Introduction; Intended Use; Features; Package Contents - Parkside 275384 Translation Of The Original Instructions

MINI BENCH GRINDER
PMDS 100 B1

Introduction

Congratulations on the purchase of your new appli-
ance. You have selected a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please famil-
iarise yourself with all operating and safety instruc-
tions. Use the product only as described and for the
range of applications specified. Please also pass
these operating instructions on to any future owner.

Intended use

The modellers' double grinding machine is de-
signed for grinding and polishing a wide range of
different materials. It is suitable for the grinding of
hard materials such as hard metals, cast iron, HSS,
ceramics and glass as well as soft materials such
as copper, aluminium and plastics. It can also be
used for tough materials such as unhardened steel,
welds, hardened steel and titanium. The appliance
is not intended for commercial use. Any other uses
of or modification to the appliance is deemed to be
improper and carries the risk of serious personal
injury. The manufacturer accepts no responsibility
for damage(s) attributable to misuse.
│ GB │ IE
■ 12

Features

Spindle locking button
Protective cover
Knurled screw for protecting cover
Grinding disc (grain size 80)*
4a
Grinding disc (grain size 100)*
4b
Plastic polishing disc
4c
Cotton disc
4d
Felt polishing disc
4e
Steel wire brush
4f
Brass wire brush
4g
Cap
Workpiece rest
Power cord
Knurled screw for workpiece rest
Grinding dust draw
ON/OFF switch
Speed control
Polishing mandrel
Shaft
Centring flange
Tension disc
Union nut
Fixing screw
*pre-assembled

Package contents

Check the package contents immediately
after unpacking the appliance:
1 mini bench grinder PMDS 100 B1
1 polishing mandrel
1 polishing set (five-piece, diameter approx. 50 mm):
- cotton disc for high-gloss finish
- plastic polishing disc for rough grinding of metals
such as stainless steel
- felt polishing disc preparing painted surfaces
- steel wire brush for rust removal and cleaning of
steel and non-ferrous metals
- brass wire brush for polishing non-ferrous and
precious metals
1 set of operating instructions
PMDS 100 B1