Table of Contents
Advertisement
AXIS P32 Network Camera Series
Configure your device
Configure your device
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 55.
Adjust the zoom and focus
To adjust the zoom:
1. Go to Video > Installation and adjust the zoom slider.
To adjust the focus:
1. Click
2. Adjust the autofocus area to cover the part of the image that you want to be in focus.
If you don't select an autofocus area, the camera focuses on the entire scene. We recommend that you focus on a
static object.
3. Click Autofocus.
4. To fine tune the focus, adjust the focus slider.
Select exposure mode
To improve image quality for specific surveillance scenes, use exposure modes. Exposure modes lets you control aperture, shutter
speed, and gain. Go to Video > Image > Exposure and select between the following exposure modes:
•
For most use cases, select Automatic exposure.
•
For environments with certain artificial lighting, for example fluorescent lighting, select Flicker-free.
Select the same frequency as the power line frequency.
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select Hold current.
Optimize IR illumination
Depending on the installation environment and the conditions around the camera, for example external light sources in the scene,
you can sometimes improve the image quality if you manually adjust the intensity of the LEDs. If you have problems with reflections
from the LEDs, you can try to reduce the intensity.
1. Go to Video > Image > Day-night mode.
2. Turn on Allow illumination.
3. Click
4. Adjust the intensity.
to show the autofocus area.
in the live view and select Manual.
9
Advertisement
Table of Contents
