Table of Contents
Advertisement
Problem
The programme dura-
tion increases or de-
creases during pro-
gramme execution.
The washing results are
not satisfactory.
Too much foam in the
drum during the wash-
ing cycle.
After the check, activate the appliance. The programme continues from the point
of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre are on the rating plate.
ENVIRONMENTAL CONCERNS
Recycle materials with the symbol
packaging in relevant containers to recycle it. Help
protect the environment and human health by
recycling waste of electrical and electronic
appliances. Do not dispose of appliances marked
28
•
The AutoSense System is able to adjust the programme duration ac-
cording to the type and the laundry load size. Refer to "The AutoSense
System load detection" in "Daily Use" chapter.
•
Increase the detergent quantity or use a different detergent.
•
Use special products to remove the stubborn stains before you wash
the laundry.
•
Make sure that you set the correct temperature.
•
Decrease the laundry load.
•
Reduce the quantity of detergent.
. Put the
*
Possible solution
with the symbol
with the household waste.
Return the product to your local recycling facility or
contact your municipal office.
Advertisement
Table of Contents
