Table of Contents
Advertisement
Gas burners
en
ÄGas burners
T his chapter explains how to set a hotplate. The table
G a s b u r n e r s
shows heat settings and cooking times for various
meals.
Advance cleaning of burner cup and cap
Clean the burner cap (1) and cup (2) with water and
washing-up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell
(5). Ensure that the igniter (3) and flame safety pin (4)
are not damaged.
The nozzle (6) must be dry and clean. Always position
the burner cap exactly over the burner cup.
18
Igniting the gas burners
Always position the burner lid precisely on the burner
cup. The openings in the burner cup must remain
unobstructed at all times. All parts must be dry.
Open the top cooker cover. The top cover must
1.
remain open for as long as the hob is in operation.
Turn the hotplate control for the required hotplate
2.
anti-clockwise to the symbol with the large flame
With the hotplate control pressed in, press the
3.
ignition button. Gas begins to flow out and the gas
burner ignites.
Press and hold the burner knob for 1-3 seconds.
4.
This activates the safety pilot. If the gas flame goes
out, the gas supply is automatically shut off by the
flame failure device.
Set the desired flame size. Between the
5.
position and the
position, the flame is not stable.
—
Therefore, always choose a position between the
large flame and
small flame.
˜
Check whether the flame is lit. If it is not, repeat the
6.
process from step 2.
To end the cooking process, turn the hotplate
7.
control clockwise to the
The hotplate control should not be actuated for longer
than 15 seconds. If the burner does not ignite within 15
seconds, wait at least 1 minute before repeating the
procedure.
The gas burner does not ignite
If there is a power cut or if the ignition plugs are damp,
you can light the gas burners with a gas lighter or a
match.
Off
û
Off position.
û
.
—
—
Advertisement
Table of Contents
