Advertisement
T3100SX
(continued)
Soft Switches
1) Change CPU speed
Fn + PgUp
Fn + pgDn
2) Pop-up window
Fn + Esc
3) Keypad overlay
Fn + NumLock
Toggles keypad overlay
4) Fn key
Fn + Ctrl
Fn + Alt
Fn + Enter
Hardware Switches and Controls
1) Power on/off
Located on right side of computer
2) Reset
Located on left side of computer
3) A/B/PRT switch
Located on left side of computer
With switch set to "A", external FDD port is accessed as drive A; internal 3.5" FDD as drive B.
With switch set to "B", external FDD port is accessed as drive B, internal 3.5" FDD as drive A.
Switch is set to "PRT" for parallel printer output.
Computer must be re-booted for switch change to take effect.
Environmental Specifications
1) Operating condition
Ambient temperature:
Relative Humidity:
2) Non-Operating condition
Ambient temperature:
Relative Humidity:
Toshiba America Information Systems Inc. ("TAIS") shall not be liable for damages of any kind for use of this information, which is subject to
change without notice.
Copyright 1994 TAIS.
16MHz CPU speed
8MHz CPU speed
Toggles pop-up window
Simulate IBM enhanced keyboard Right Ctrl
Simulate IBM enhanced keyboard Right Alt
Simulate IBM enhanced keyboard numeric keypad Enter
41 to 95 degrees F.
5 to 35 degrees C.
20% to 80% non-condensing
-4 to 140 degrees F.
-20 to 60 degrees C.
5% to 90% non-condensing
3100SX.DOC Rev. 3 09/24/96 MQC/nmm.
Page
111
Advertisement
