Table of Contents
Advertisement
AXIS Q60-E Series
Configure your device
Configure your device
Basic settings
Set the capture mode
1. Go to Video > Installation > Capture mode.
2. Click Change.
3. Select a capture mode and click Save and restart.
See also Capture modes on page 53.
Set the power line frequency
1. Go to Video > Installation > Power line frequency.
2. Click Change.
3. Select a power line frequency and click Save and restart.
Set the orientation
1. Go to Video > Installation > Rotate.
2. Select 0 , 90, 180 or 270 degrees.
See also .
Adjust the image
This section includes instructions about configuring your device. If you want to learn more about how certain features work, go
to Learn more on page 53.
Level the camera
To adjust the view in relation to a reference area or an object, use the level grid in combination with a mechanical adjustment
of the camera.
1. Go to Video > Image > and click
2. Click
3. Adjust the camera mechanically until the position of the reference area or the object is aligned with the level grid.
Adjust the focus
This product has three focus modes:
•
Auto: The camera automatically adjusts focus based on the entire image.
•
Area: The camera automatically adjusts focus based on a selected area of the image.
•
Manual: The focus is set manually at a fixed distance.
To turn off autofocus and adjust the focus manually:
1. In the live view window, if the Zoom slider is visible, click Zoom and select Focus.
to show the level grid.
.
6
Advertisement
Table of Contents
