LG WT22BS6HP Owner's Manual page 23

• Press Wash button until the desired wash time is
selected.
Rinse
Use this option to change the number of rinses.
• Press Rinse button to change the number of
rinses.
• When the Rinse option is selected,
• If selecting the maximum number of rinses, then
this option is deactivated.
NOTE
• This option is only available on some
programmes.
Spin
Use this option to change the spin strength. When
you press the START/PAUSE button after selecting
this option, the remaining time is indicated on the
display.
NOTE
• Always keep the laundry amount to 2 kg or less
and make sure to redistribute the clothes evenly.
• Select 60 minutes for cotton laundry and 120
minutes for synthetic fibre laundry for effective
moisture reduction.
To Use the Air Dry Function
When you select Air Dry, you can reduce the drying
time by minimizing the moisture that remains
within the clothes.
• Press the Spin button for 3 seconds to select and
press the POWER button to deselect.
Using Special Options
You can customize the programmes by using the
following special options:
Turbo Wash
Adding this option reduces the programme time
but the similar washing results will be provided.
Strong Wave
Use this option to change the strong water wave.
• It is set to medium water wave by default and it
is not indicated on the display.
Follow the next steps to use a special
option.
1
icon is lit.
l
2
3
4
Using Basic Options
Time Delay
Use this function to delay ending time. The
appliance will start automatically and finish after a
specified time interval.
1
2
3
4
NOTE
• This function is the time to the end of the
programme, not the start. The actual running
time may vary due to water temperature, wash
laundry and other factors.
• Reservation can be made up to 18 hours;
- 1 hour interval up to 3 - 12 hours
- 2 hours interval up to 12 - 18 hours
• This function cannot be set for less than 3 hours.
Press the POWER button.
Select a washing programme.
To use special options, press Turbo Wash or
Strong Wave button.
Press the START/PAUSE button.
Press the POWER button.
Select a washing programme.
Press the Time Delay button to set the
required delay ending time.
Press the START/PAUSE button.
OPERATION 23 EN