Advertisement
User instructions
ENERSAVE OPTION + EXTRA OPTION BUTTON
8
(see "EXTRA OPTIONS" section)
Press the button to enable/disable the option.
ENERSAVE OPTION LIGHT
9
Illuminates to indicate that the function is activated.
HALF LOAD BUTTON
10
Press this button to activate the half load wash option.
HALF LOAD LIGHT
11
One of the two buttons illuminates to indicate that the half load
wash option in the top or bottom basket has been selected.
PROGRAM DELAY BUTTON
12
Press this button to delay the start of the program.
"Flexi Tabs" OPTION LIGHT (EXTRA OPTION)
13
Illuminates to indicate that the function is activated.
14 INFORMATION DISPLAY
N.B.: symbols and styling are guideline and may vary depending on
the model or version of the dishwasher purchased.
SETTING THE WASHING PROGRAM AND SWITCHING ON
After identifying the most suitable program with the aid of the programs
table:
•
Press the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
•
Keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
•
select the option required (if any and if the model provides options);
•
close the door; after about 2" the program will start LIGHT will
flashing (indicating that the program is being executed).
3
Advertisement
