Yamaha LEXI Owner's Manual page 75

1. Final transmission oil filler cap
2. O-ring
5. Remove the final transmission oil
drain bolt and its gasket to drain
the oil from the final transmission
case.
1 2
1. Final transmission oil drain bolt
2. Gasket
Periodic maintenance and adjustment
6. Install the final transmission oil
drain bolt and its new gasket, and
1
then tighten the bolt to the speci-
2
fied torque.
TIP
 Before installing the final transmis-
sion oil drain bolt and gasket, ap-
ply oil to them.
 Wipe off any excess oil after
wards.
Tightening torque:
Final transmission oil drain bolt:
20 N·m (2.0 kgf·m, 15 lb·ft)
7. Refill with the specified amount of
the recommended final transmis-
sion oil. WARNING! Make sure
that no foreign material enters
the final transmission case.
Make sure that no oil gets on
the tire or wheel.
Recommended final transmission
oil:
See page 11-1.
Oil quantity:
0.15 L (0.16 US qt, 0.13 Imp.qt)
9-14
8. Install the final transmission oil fill-
er cap and its new O-ring, and
then tighten the oil filler cap.
9. Check the final transmission case
for oil leakage. If oil is leaking,
check for the cause.
[EWA11312]
9