Haier LED46T3 Service Manual page 75

Service Manual
Model No.: LEA46T3
Chapter 8. Measurements and Adjustments
8-1. Service Mode
8-1-1.How to enter into Service Mode
The way to the factory mode menu:
1st, press menu,
2en, input 8893,
Finished these operations ,system will be into the factory mode menu.
At the end of the main factory menu, you can see the edition of the software,
like this" L_MSD209_AU32 ".
8-1-2.How to exit
If you want to exit this factory menu, please press the button "Exit" on the remote.
system will be out the factory mode menu.
8-2. Measurements and Adjustments
8-2-1. The Main Menu
In factory mode menu,press up/down button to choose the up/down item,press left/right button
to the submenu,press "OK"button to affi rm .press MENU button go to the next page.
46
MSD209 Factory Menu
In this page, you just consider "RESET
ALL" function.This function you can reset all
date return to factory state.if you encounter
inextricable problem,you can try this function.
Press up/down button to select "RESET
ALL",press "OK" button.It needs a few
secounds.
NOTE : After reset ,please shut off the power.
Be carefully use this function.