Table of Contents
Advertisement
POWER PROGRAMMABLE LIFTGATE
OPEN/CLOSE THE POWER LIFTGATE
Press the
Power Liftgate button on the Remote
Keyless Entry transmitter (key fob) twice.
Press the
overhead console.
Press the touchpad (B) on the liftgate handle to open
the liftgate.
Press the button (C) next to the liftgate latch to close
the liftgate.
PROGRAMMING THE LIFTGATE HEIGHT
1. Turn the Power Liftgate knob (A) to the
3/4 position.
2. Open the liftgate.
3. Adjust the liftgate manually to the
desired height.
4. To save the setting, press and hold the
button (C) next to the liftgate latch until the
turn signals flash and a beep sounds.
HANDS-FREE OPERATION
To open or close the liftgate hands-free,
kick your foot straight under the passen-
ger's side of the rear bumper, right of
center. The key fob must be within 3 feet
of the liftgate. Depending on operating
conditions, the GMC logo (D) is projected
on the ground near the rear bumper to
indicate the kicking motion location.
Note: To change the hands-free operation settings,
go to Settings > Vehicle > Comfort and Convenience >
Hands Free Liftgate on the infotainment screen.
POWER RUNNING BOARDS
The Power Running Boards lower automatically when a door is opened and retract
after the doors are closed.
To turn the boards on or off, go to Settings > Vehicle > Running Boards >
Automatic Running Boards.
To deploy the boards for cleaning or to use the boards with the doors closed, with
the vehicle in Park or Neutral, go to Settings > Vehicle > Running Boards > Deploy
Running Boards.
Optional equipment
F
Power Liftgate knob (A) on the front
F
Some equipment shown may not be included in your vehicle.
F
See Keys, Doors and Windows in your Owner's Manual.
F
See Keys, Doors and Windows in your Owner's Manual.
A
C
B
D
9
Advertisement
Table of Contents
