Directing The Display Output When You Turn On The Computer - Toshiba Satellite R20-ST2081 User Manual

Directing the display output when you turn on the computer

Once you have connected an external display device, you can
choose to use the internal display only, the external device
only, or both simultaneously. The quickest way to change the
display output settings is to use the display hot key (
1 Press
2 While holding down
setting you want takes effect. Briefly pause each time you
press the
This hot key cycles through the settings in the following
order:
❖
❖
❖
❖
❖
❖
❖
❖
(Sample Image) Display options window
3 Release the
Using external display devices
and simultaneously.
Fn F5
key to allow time for the display to change.
F5
Built-in display only
Built-in display and external monitor
simultaneously
External monitor only
TV and built-in display
TV only
Primary and CRT
Dual Mode Display
Swap image Display
key.
Fn
Getting Started
, press repeatedly until the
Fn F5
59
+ ):
Fn F5