Honda RIDGELINE 2024 Owner's Manual page 484

Table of Contents

Advertisement

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter
Oil Filter
482
6. Remove the oil filter and dispose of the
remaining oil.
7. Check that the filter gasket is not stuck to
the engine contact surface.
If it is stuck, you must detach it.
u
8. Wipe away dirt and dust adhering to the
contact surface of the oil filter base, and
install a new oil filter.
u
Apply a light coat of new engine oil to
the oil filter rubber seal.
9. Put a new washer on the drain bolt, then
reinstall the drain bolt.
u
Tightening torque:
30 lbf∙ft (40 N∙m, 4.1 kgf∙m)
10. Pour the recommended engine oil into the
engine.
u
Engine oil change capacity (including
filter):
5.7 US qt (5.4 L)
1Changing the Engine Oil and Oil Filter
You will need a special wrench to replace the oil
filter. You can buy this wrench from a dealer.
When installing the new oil filter, follow the
instructions supplied with the oil filter.
Reinstall the engine oil fill cap. Start the engine. If the
Engine oil pressure low warning appears, turn off
the engine, and check your work.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents