Asus TwinView V7100/Pure User Manual page 50

4. Software Reference
Special Notes (Clone mode)
These icons on the Display tab
appear only under Clone mode
Click to make monitor adjustments to the pri-
mary display device in Clone mode.
Click to make monitor adjustments to the sec-
ondary display device in Clone mode.
For example, if your secondary display device is
TV, click the TV tab to adjust, among others, Con-
trast or Position of the TV display (see 4. Soft-
ware Reference | TV later in this section).
Change Resolution
Change Resolution displays the Change Resolution box to let you customize a new resolution and refresh
rate of the secondary display device in Clone.
NOTE: The following descriptions apply only to the secondary display device under Clone mode.
To customize a resolution or refresh rate or both
1. Click .
2. Click the Change Resolution pop-
up button when it appears.
3. In the Change Resolution box,
change the settings according to your
preference and then click OK.
50
Secondary Display Device in Clone/Windows 98 only
ASUS V7100 Series User's Manual