Cleaning, Care And Service; Disposal; Service - AEG WM 8 Manual

Shop charging device
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 17

cLEAnInG, cARE AnD SERVIcE

your charger can be kept functional for years with minimum care.
After the charging process is completed, clean the clamps. to prevent corrosion,
wipe off any battery fluid that has come into contact with the clamps.
Roll up the cables properly when you store the charger. this helps to prevent
damage to the cables and the charger.
Occasional cleaning of the charger casing with a soft cloth keeps the surface
shiny and helps to prevent corrosion.
Store the charger in a clean and dry location.
Caution!
Only qualified technical personnel should change the plug or the connecting cables.
this will guarantee the safety of the device is maintained.
If the product is no longer suitable for use dispose of it in an environmentally
friendly manner in accordance with your local ordinances.

Disposal

the packaging consists of non-contaminating materials that you can dispose of at
your local recycling point.
Do not throw electrical appliances in with domestic waste!
In accordance with European Directive 2012/19/Ec for waste electrical
and electronic equipment (WEEE) and conversion to national law, used
electrical appliances must be collected separately and taken to a recycling point.
For ways to dispose of old electrical appliances please contact your community or
city administration.

Service

Should you have any questions regarding commissioning or operating in spite
of studying these operating instructions, or if a problem should occur against all
expectations, please get in contact with your specialist supplier.
GB
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wm 12

Table of Contents