Sony HT-MT500 Operating Instructions Manual page 38

Notes
• When using the wireless surround
function, the wireless LAN function is not
available. Connect to the network with a
wired LAN.
• When using the wireless surround
function, you cannot set [
Mode Transmitter
] to [
• When using the wireless surround
Bluetooth Codec - LDAC]
function, [
(page 50) is not available.
To perform the setting on the
system
1
Update the wireless speaker to
the latest version.
The software of the wireless
speaker is not updated
automatically when using the
wireless surround function. To
update, cancel the wireless
surround function and connect the
wireless speaker to the internet.
2
Connect the system to the
network with a wired LAN
(page 18).
When using the wireless surround
function, the wireless LAN function
is not available.
3
Install the applicable speakers,
and turn them on.
4
Press HOME.
The home menu appears on the TV
screen.
5
Select [Setup] from the home
menu.
The setup display appears on the TV
screen.
6
Select [Wireless Surround
Settings].
7
Perform the setting by following
the on-screen instructions.
38
GB
Bluetooth
] (page 50).
Tip
You can display the setting display for the
wireless surround function by selecting
[Wireless Surround] on the home menu.
To perform the setting on
SongPal
1
Update the wireless speaker to
the latest version.
The software of the wireless
speaker is not updated
automatically when using the
wireless surround function. To
update, cancel the wireless
surround function and connect the
wireless speaker to the internet.
2
Connect the system to the
network with a wired LAN
(page 18).
When using the wireless surround
function, the wireless LAN function
is not available.
3
Install the applicable speakers,
and turn them on.
4
Select the system on SongPal,
then perform the setting by
following the instructions on
SongPal.
Note
The SongPal settings are effective with the
SongPal of version 4.0 or later. For details
about the SongPal installing, see "Using
SongPal" (page 34).
To cancel the wireless surround
function
Select [Setup] - [Wireless Surround
Settings] - [Stop Wireless Surround] on
the home menu.