Table of Contents
Advertisement
•
USB setup: Turns On/Off the USB Hub function during standby mode.
•
Power Indicator: Turn the power LED indicator on/off.
•
Power Key Lock: Enables or disables the power key.
•
Key Lock: To disable all function keys. Press the down button for more
than 5 seconds to cancel the key lock function.
•
Power Setting:
*
*
Certain functions that consumes power will be disabled when Power Saving
Mode is selected. If you wish to enable the functions, choose Standard Mode.
Please turn off HDR function before activating the Power Saving Mode.
•
OSD Setup:
*
*
*
*
•
DisplayPort Stream: Compatibility with graphic card. Select DisplayPort
1.2 or DisplayPort 1.4 by graphic card DP version.
•
Information: Shows the monitor information.
•
All Reset: "Yes" allows you to restore the default settings.
3-8
Standard Mode: Standard mode setting may result in higher
power consumption.
Power Saving Mode: Power saving mode may cause limited
luminance performance.
Adjusts the horizontal position (H-Position)/the vertical position
(V-Position) of the OSD.
Adjusts the OSD timeout from 10 to 120 seconds.
Adjusts the OSD background from opaque to transparent.
Enables or disables the DDC/CI function.
Chapter 3: General Instructions
Advertisement
Table of Contents
