Grandstream Networks GXV3651 Series User Manual page 27

Record Video and Upload to FTP server – If this option is selected, the GXV3651will record
the video and upload it to the FTP server when an alarm is triggered. You must check Record
Video and configure the FTP page properly to use this feature.
Email JPEG and Store it to USB drive or SD card – If this option is selected, the GXV3651
will capture the image and store it to connected live storage device when an alarm is
triggered.
Set up Alarm Event Time Schedule
This section allows you to configure the time during which the GXV3651 will monitor the
Alarm Input. The GXV3651 not only can monitor your settings but also can take actions when
the alarm is triggered.
Dropdown
date
To add a schedule, select the date from the dropdown list, Start Time and End time and
Click Add to add a new time schedule.
To delete a schedule, check the schedule you would like to remove and click Delete.
How to connect an Alarm Output Equipment to GXV3651
Here is a sample connection diagram. Connect the alarm output equipment to the GXV3651
by following the diagram below.
Firmware 1.0.4.6
Grandstream Networks, Inc. 09/2010
list for
GXV3651 IP Camera
Available time
schedules
Page 27 of 35