Pair The Earphones With Another Bluetooth Device - Philips TAT2206BK/00 User Manual

The following example shows you
how to pair the earphones with
your Bluetooth device.
Turn on the Bluetooth function
of your Bluetooth device, select
Philips TAT2206.
Enter the earphones password
"0000" (4 zeros) if prompted.
For those Bluetooth devices
featuring Bluetooth 3.0 or
higher, no need to enter a
password.
Philips TAT2206
Single earpiece (Mono mode)
Take either right or Left earpiece out
from charging box for Mono use. The
earpiece will power on automatically.
There will be a voice "Power on" from
earpiece.
Note
 Take the second Earpiece from the charging
box and they will pair each other automatically.
Pair the earphones with
another Bluetooth device
If you have another Bluetooth device
that you want to pair with the
earphones, make sure the Bluetooth
function in any other previously paired
or connected devices are turned o .
Press and hold over 5 seconds both left
& right side simultaneously with earpiece
on ear, release when Pairing voice
prompt is heard.
Note
 The earphones stores 4 device in the memory. If
you try to pair more than 4 devices, the earliest
paired device is replaced by the new one.