Table of Contents
Advertisement
30
www.aeg.com
3. Press the On/Off
seconds to activate the appliance.
A short tune sounds. The appliance
automatically proposes a default
programme. The relevant indicator
illuminates.
The display shows the cycle duration, the
maximum load (for a few seconds), the
default temperature, the default spin
speed and the indicators of the phases
making up the programme.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
appliance.
button for a few
12.3 Filling the detergent and
additives
- Compartment for detergent pods
(Max 2 pods). When using detergent tab‐
lets, make sure that the Pods® option is
activated.
- Compartment for prewash phase
an soak programme (powder detergent
only).
- Compartment for washing phase
(powder detergent only).
Make sure that the Pods®
option is deactivated when
using this compartment.
If using liquid detergent, re‐
member to insert the con‐
tainer for liquid detergent
.
- Compartment for fabric softener
and other liquid treatments (fabric condi‐
tioner, starch).
- Always follow the instructions that
you find on the packaging of the detergent
products, but we recommend that you do
not exceed the maximum indicated level
(
). This quantity will however guaran‐
tee the best washing results.
Advertisement
Table of Contents
