Caution:
1、 Don't close the power supply when the TV set is on,because
it may short the life-span of TV.
2、 Before welding PCB turn off the power first, otherwise it may
cause short circuit.
3、 Adjustment must be done with correct instructions
NOTE:
1、 When the remote controller doesn's work ,please insure that
there is no obstacle between TV set and the remote
controller.
2、 Keep the remote controller away from heat source or high
moisture and avoid impacts to the remote controller.
3、 Do not operate the remote controller directly in floodlight or
strong sunlight.
4、 When the television temperature is low ,initial pictures might
flicker a bit.
5、 Some red,green and blue spots may appear on the screen.
6、 When used as a compucter monitor,It is recommended that
television screens with 1024*768 pixel/60Hz.
7、 Sometimes the remote controller is out of function.this may be
caused by that the Low Emitting Diode is disturbed by
Cautions and Notes
- 7 -