29.5"
16.5"
2.7"
Item Features
Frame
The product's main interior frame that carries/holds weight and pressure is constructed from hardwood
timber while other sections that is not exposed to direct pressure are made from particle board. 100%
solid timber ıs used to support the main carrier sections where legs are installed.
Legs
Legs are made of high carrier capacity hard plastic.
Cushions
The sofa seat cushions are filled with 4.7'' (12 cm) thick 32 density soft gray foam.
Pillows
Pillows are filled with a particle foam.
Fabric
Easy to clean, woven polyester and cotton blend fabric is used for upholstery.
Health & Safety
Manufactured from human health and environment friendly materials.
Assembly
The legs and back parts of the product are shipped disassembled. You should place the back pieces by
pushing till the end of the channel we created. There are two back and one corner pieces that need to be
installed on the product base. Poufs are connected to the corners with connectors. You need to connect
one side of the fastener, the other side comes pre installed. You can assemble the product using a
screwdriver.
Installation
Power drill is enough to install legs.
Package includes
Legs and installation hardware come with the package.
Proper Usage
Do not expose the item to sunlight directly . Direct sunlight
may cause
fading of the color.
Please protect upholstery fabric from sharp objects, glue,
hot objects, fire and chemical materials.
For a better look of your cushions, you can turn them
upside down once a week.
071-000324
110.2"
Clean ng
Fi r stl y , clean your furniture with vacuum cleaner.
Please put some pure soap in a bucket of warm water.
Make sure that the soap is fully dissolved in the warm water
Before cleaning your furniture, try a test clean in a small
area on the back of the seat cushion first.
Please wait until cushions and pillows are fully dried.
Assembly Manual
82.7"
31.5"
27.5"
pure
soap