Adjusting The Rear-Shock Assemblies - Toro 74024 Operator's Manual

Adjusting the Rear-Shock
Assemblies
Machines with MyRide™
Suspension System Only
The MyRide™ suspension system adjusts to provide
a smooth and comfortable ride. You can adjust the
rear 2-shock assemblies to quickly and easily change
the suspension system. Position the suspension
system where you are most comfortable.
The slots for the rear-shock assemblies have
detent positions for reference. You can position the
rear-shock assemblies anywhere in the slot, not just in
the detent positions. The following graphic shows the
position for a soft or firm ride and the different detent
positions (Figure 14).
Figure 14
1. Firmest position
2. Softest position
Note:
Ensure that the left and right rear-shock
assemblies are always adjusted to the same positions.
Adjust the rear-shock assemblies
g030065
3. Detents in the slots
(Figure 15).
20
Figure 15
g030024
g030019