Toshiba 42X3030D Service Manual page 7

Page 4 of 4
Layer Display Changing Function
When any of the color buttons on the toolbar is clicked, it can be selected to display desired
layer in its color or not to display each layer. This allows you to see the pattern layer only by
8
setting other layers to "non-display".
PC Board View Pattern Highlighting Function
When a pattern on a board view is clicked, it is highlighted in green. This allows easy pattern
8
tracing.
Specified Area Printing Function
The Autodesk DWF Viewer enables to print the displayed drawing region as it is on a
8
printer. It also allows to print a large-sized drawing in multiple pieces (tile printing).