Controls - MTD 62BD Operator's Manual

Controls & Features
Chute Assembly
Chute Clean
Out Tool
Augers
Snow thrower controls and features are described below and
illustrated in Fig. 4-1.
Skid Shoes
Position the skid shoes based on surface conditions. Adjust
upward for hard-packed snow. Adjust downward when
operating on gravel or crushed rock surfaces.
Augers
When engaged, the augers rotate and draw snow into the auger
housing.
Chute Assembly
Snow drawn into the auger housing is discharged out the chute
assembly.
Drive Control
Skid Shoe
Figure 4-1
Chute Directional Control
The chute directional control is located on the left side of the
snow thrower. To change the direction in which snow is thrown,
rotate the chute directional control.
Auger Control
Chute Directional
Control
4
11