BenQ BL2785TC User Manual page 49

Item
Display This feature is provided to allow aspect ratios other than
Mode 16:9 to be displayed without geometric distortion.
Full
Aspect
Input Auto Sets to automatically detect the available input source.
Switch
USB-C If this function is disabled, the USB-C™ port is not
Charging supplied with power while the monitor is in standby
60W mode.
To keep supplying power to the USB-C™ port in
monitor's standby mode, change the setting to ON.
MST Allows data transmission while multiple monitors are
daisy-chained.
AMA Improves the gray level response time of the LCD panel.
RGB PC Determines the range of color scales. Select an option
Range
that matches the RGB range setting on the connected
HDMI device.
DDC/CI Allows the monitor settings to be set through the
software on the PC.
Auto Power Sets the time to power off the monitor automatically in
Off power saving mode.
Function
The options under Display Mode will be different depending
on the input signal sources.
Depending on your selection of Mode, different Display Mode
option is pre-set. Change the setting if needed
Scales the input image to fill the screen. Ideal
for 16:9 aspect images.
The input image is displayed without
geometric distortion filling as much of the
display as possible.
Available only when the input source is DP or USB-C™.
DDC/CI, short for Display Data Channel/Command Interface,
which was developed by Video Electronics Standards
Association (VESA). DDC/CI capability allows monitor controls
to be sent via the software for remote diagnostics.
Range
• ON
• OFF
• ON
• OFF
• ON
• OFF
• OFF
• High
• Premium
• Auto Detect
• RGB (0~255)
• RGB (16~235)
• ON
• OFF
• OFF
• 10 min
• 20 min
• 30 min
Navigating the main menu 49