Zanussi ZCV669MW User Manual page 18

Covering terminal board
• The recommended cross-section area is six
square millimetres (6 mm²).
• When you refit the mains terminal cover,
make sure that the lower tabs are located
inside the bottom edge of the aperture,
before you fix the two screws into the top
edge of the mains terminal cover.
• Make sure that the cover is securely
fastened.
ENVIRONMENT CONCERNS
Recycle the materials with the symbol
the packaging in applicable containers to
recycle it. Help protect the environment and
human health and to recycle waste of electrical
and electronic appliances. Do not dispose
18
To open the cover of terminal board
obey the procedure in opposite
sequence.
Terminal board
Do not remove blanking plates.
Make sure that the links are fitted as shown.
appliances marked with the symbol
. Put
household waste. Return the product to your
local recycling facility or contact your municipal
office.
*
L L N N
www.zanussi.com
N
with the