Rear Wheel - Yamaha YZ85M 2021 Owner's Manual

Periodic maintenance and adjustment
5. Remove the wheel. NOTICE: Do
not apply the brake after the
wheel and brake disc have been
removed, otherwise the brake
pads will be forced shut.
To install the front wheel
1. Make sure the brake pads have
not been forced shut.
2. Lift up the wheel between the fork
legs.
3. Insert the wheel axle from the right
side.
4. Install the washer and axle nut.
5. Tighten the axle nut to the speci-
fied torque.
Tightening torque:
Axle nut:
70 N·m (7.0 kgf·m, 52 lb·ft)
7

Rear wheel

[ECA11073]
To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the axle nut.
1. Axle nut
2. Washer
2. Place the motorcycle on a suitable
stand. (See page 7-28.)
3. Loosen the locknut, and then turn
the drive chain slack adjusting bolt
in direction (a). Repeat for the oth-
er side.
1. Drive chain slack adjusting bolt
2. Locknut
3. Drive chain puller
7-29
1
1
(a)
3 2
EAU25081
EAU84051
EWA10822
2