Table of Contents
Advertisement
402S
2.
Keep a good firm grip on the saw with both hands, the right hand on the
rear handle, and the left hand on the front handle, when the engine is
running. Use a firm grip with thumbs and fingers encircling the
chainsaw handles. A firm grip will help you reduce kickback and
maintain control of the saw. Don't let go.
3.
Make sure that the area in
which you are cutting is free
from obstructions. Do not let
the nose of the guide bar
contact a log, branch, or any
other obstruction which could
be hit while you are operating
the saw.
4.
Cut at high engine speeds.
5.
Do not overreach or cut above shoulder height.
6.
Follow manufacturer's sharpening and maintenance instructions for the
saw chain.
7.
Only use replacement bars and chains specified by the manufacturer or
the equivalent.
Correct Use of Chain Brake
Chain Brake Operation
• Set the lever in the unlocked
position before starting to cut.
• If the brake is tripped by kickback
reaction, the chain will stop
immediately. Release the throttle
to avoid possible damage to the
engine or clutch.
• Do not attempt to operate the
engine with the brake locked.
X7503256304
© 11/23 ECHO Incorporated
Linear kickback
Kickback
Unlocked
Locked
SAFETY
Pinch
13
Advertisement
Table of Contents
