HoMedics Mirra TIDE Manual page 2

HOW TO USE
Instructions
1. Familiarize yourself with the pump. The switch located at
the front of the pump controls the pump speed. The speed
is indicated by a plus (+) and minus (-) sign. To increase the
speed, move the switch slowly to the left in the direction
of the plus sign. At its highest speed level, the switch will
cease to move any farther. To decrease the pump speed
for less water flow, move the switch to the right toward
the minus sign. Similarly, at its lowest speed, the switch will
cease to move any farther.
2. Connect the male and female parts of the LED light
connector and twist cap tightly.
3. Insert the tube into the pump.
4. Fill base with water up to the fill line. Keep the water filled to
the suggested level at all times for optimum performance.
5. Set the fountain top onto the base.
6. Rinse the rocks with water. Arrange the rocks on
the platform.
7. Attach the AC adapter jack to the base power cord.
DO NOT plug into an outlet at this time.
8. Set the fountain on a level, waterproof surface.
9. Plug the cord into a 120V household outlet. The switch
located on the power cord controls the fountain. If the
pump doesn't operate, click the power button once to
turn the fountain on and once more to turn off.
NOTE: Ensure that the electrical cord loops below the
electrical outlet to form a "drip loop." This will prevent water
from running down the cord into the electrical outlet.
10. For the best results, operate with the pump completely
submerged. Keep the water level at the fill line at all times.
TO CLEAN
1. To clean the pump: Unplug from electrical outlet. Use a
small brush or stream of water to remove any debris.
2. To keep water clean: Periodically change the water and
clean the product according to the water condition. Over
time, fountain water and the fountain itself become dirty.
We suggest cleaning and exchanging water weekly to
increase the longevity of the fountain.
3. To clean off hard water deposits on the base: Soak the
base in a mixture of vinegar and water to clean and
remove any mineral buildup.
4. Keep water at an optimum level: Add water periodically
to keep it at an optimum level to avoid shortening the life
of the pump. Never let the pump run dry.
5. Fountain storage: Unplug the fountain from the electrical
outlet, empty the water, dry the fountain, and store rocks
and fountain in a cool, dry place.
www.homedics.com US: 1-800-466-3342 CAN: 1-888-225-7378 IB-WFL530