Table of Contents
Advertisement
en Before using for the first time
5.3 Cooking zone
Before you start cooking, check whether the size of the
cookware fits the cooking zone that you want to use for
cooking:
Area
Cooking zone type
Single-circuit cooking zone
Flex Zone
→ "flexInduction", Page 10
Extended FlexZone
→ "flexInduction Plus", Page 11
Before using for the first time
6 Before using for the first time
Observe the following recommendations.
6.1 Initial cleaning
Remove any leftover packaging from the hob surface
and wipe the surface with a damp cloth. You can find a
list of recommended detergents on the official website
siemens-home.bsh-group.com.
More information on care and cleaning. → Page 20
6.2 Cooking with induction
In comparison to conventional hobs, induction techno-
logy brings with it a series of changes and has a num-
ber of benefits such as time savings when cooking and
frying, energy savings as well as greater ease of clean-
ing and care. It also offers improved heat control as the
heat is generated directly in the cookware.
Software update
7 Software update
If the appliance is connected to Home Connect, some
functions may be available with a software update.
Basic operation
8 Basic operation
8.1 Switching on the hob
Touch
.
▶
A signal sounds. The symbols for the cooking zones
and the currently available functions light up.
lights up in the cooking zone displays.
a The hob is ready to use.
reStart
If you switch the appliance on within four seconds of
▶
switching it off, the hob operates with the settings
that were previously set.
8.2 Switching the hob off
Touch
until the displays go out.
▶
a All cooking zones are switched off.
8
5.4 Residual heat indicator
The hob has a residual heat indicator for each cooking
zone. Do not touch the cooking zone if the residual
heat indicator is lit.
Display
Meaning
The cooking zone is hot.
The cooking zone is warm.
6.3 Cookware
You can find a list of recommended cookware on the
official website siemens-home.bsh-group.com.
Further information on suitable cookware. → Page 5
6.4 Setting Home Connect
When you first switch on the appliance, you will be
prompted to set your home network.
few seconds on the display panel.
To begin the connection to Home Connect, touch
and proceed in accordance with the information in the
section
→ "Home Connect ", Page 17.
To end the setting, switch off the hob.
You can also adjust the Home Connect setting at a dif-
ferent time.
More information on the availability of additional func-
tions can be found on the website siemens-home.bsh-
group.com
Note: If all of the cooking zones are switched off for
longer than 59 seconds, the hob is automatically
switched off.
8.3 Setting the power level in the cooking
zones
The cooking zone has 17 power levels, which are dis-
played from
to
with intermediate values. Select the
best power level for the food and the planned cooking
process.
Touch the required cooking zone display
1.
and
get brighter.
a
Select the required power level in the settings area.
2.
a The power level has been set.
lights up for a
Advertisement
Table of Contents
