Kenwood KAC-8020 Service Manual page 16

SENSITIVITY
O.5V
(LOW)
systems.
MW
2V 0O.1V
(NORMAL)
set this to 0.5 V (LOW).
Precautions
Connection
SUBWOOFER
50Hz (ie 100Hz OFF J
e Subwoofer selector
This selector is for selecting speaker out-
put mode, normal or subwoofer.
When the subwoofer selector is set to
50 Hz or 100 Hz, the output level is in-
creased by 6 dB.
Adjust the ouput level with the sensitivity
control.
OFF: The normal signal is output from
the speaker output terminals.
50 Hz: Super low-frequency signal hav-
ing the cut-off frequency of 50 Hz,
cut-off slope of 18 dB/oct is output
from the speaker out terminals for
connecting the sub-woofer.
100 Hz: Super low-frequency — signal
having the cut-off frequency 100 Hz,
cut-off slope 18 dB/oct is output from
the speaker output terminals for con-
necting to the sub-woofer.
KAC-8020
{oe
© Input sensitivity control
The input sensitivity control adjusts the input sensitivity within a range
of 0.1 V to 2.0 V continuously, enabling expansion with various
Normally, set the input sensitivity control to 0.1 V (NORMAL) position
for KENWOOD cassette receiver or cassette tuner. When the output
voltage selector of the cassette receiver or cassette tuner is set to 1 V,
before.
high level, the speaker unit may be damaged.