Advertisement
CLEAN
UNDER ENGINE
COVER
Clean under engine cover before each
use, or more frequently
in heavy cutting
or dirty conditions.
Engine cover screen
and engine air intake screen must be
kept free of dirt and chaff to prevent
engine damage
from overheating.
Knob
Engine
cover
Be sure engine is cool before cleaning.
1. Unscrew knob on top of cover.
2. Lift cover up and away from engine.
3. Clean cover and cover screen
thoroughly.
4. Clean top of engine and air intake
screen.
5. Replace engine cover and tighten
knob securely.
Be sure the front tabs
of engine cover are located in the
slots in engine housing.
Threaded
Starter
rope
Engine
cover
screen
Air intake screen
Housing
slots
CAUTION:
Before performing
any
service and adjustments:
1. Stop engine.
2. Make sure the rotating lines and all
moving parts have completely
stopped.
3.
Disconnect
spark plug wire from spark
plug and place where it cannot come
in contact with plug.
TRIMMER
TO ADJUST TRIMMING HEIGHT
See "TO ADJUSTTRIMMING
HEIGHT" in the
Operation section of this manual.
TO ADJUST HANDLE
The upper handle may be adjusted to
different height positions.
• Loosen handle knob only enough
to
allow the upper handle to pivot to the
desired
position.
• Tighten handle knob securely.
NOTE: The handle knob and bolt may be
reversed for left handed operation.
Upper
Handle
knob
//
I!
12
Advertisement
