Table of Contents
Advertisement
Available languages
Available languages
IMPORTANT NOTES
Important Notes
Television Location
This unit can be used as an entertainment center. Consult your deater for available options.
D
Avoid excessive sunlight or bright lights, including reflections.
O
Keep away from excessive heat or moisture.
Inadequate ventilation may cause internal
component failure.
O
Fluorescent lighting may reduce Remote Control transmitting range.
O
Keep away from magnetic equipment, including motors, fans, or external speakers.
Optional Cabte Connections
Shielded audio and video cables should be used between components. For best results:
O
Use 75-ohm coaxial shielded cables.
O
Check type of output and input connectors on your components.
O
Determine required cable lengths.
AC Power Supply Cord
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
Polarized Plug
RECEPTACLE
OR OTHER
OUTLET
UNLESS
THE
BLADE
CAN
BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
FOR SOME MODELS THAT ARE
t=
NON-POLARIZED,
THE
USE
OF
AN
AC
ADAPTOR
CONNECTOR
MAY
BE NECESSARY.
Cable / Antenna Connections
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming Cable from
à
Cable Company
Connect the cable supplied by your local cable company or select
Antenna 1 or 2 (Ant 1 or Ant 2) if you do not have cable.
fy
Note:
A cable converter box may be required for proper reception.
Comm
Check
with
your
local
cable
company
for
compatibility
75 Ohm VHF/UHF
requirements.
on back of TV
Antenna Connections
+
For proper reception of VHF/UHF
channels,
an external antenna
is
required. For best reception an outdoor antenna is recommended.
e
Select Antenna 1 and Antenna 2, in the Roller Guide SET
UP Menu under Prog. Chan.
MX
= We Cable Preset
Cable
Mode
is preset
at
the
factory.
Antenna
users must change to TV Mode
(antenna)
for antenna
use in the Set Up
Menu.
Incoming Cable from
Home Antenna
@
Advertisement
Chapters
Table of Contents
