Specifications; Service Data - Teac X-1000R Service Manual

SPECIFICATIONS
Motors
Capstan motor: FG servo DC motor
Reel motor: 2 DC slotless motors
Bias Frequency — 100kHz
Power Requirements
100/120/220/240V, AC 50/60Hz 90W (General export model)
220V AC 50Hz, 100W (Europe model)
240V AC 50Hz, 100W (U.K./Australia model)
120V AC 60Hz, 90W (U.S.A./Canada model)
Weight 22.0kg (48-8/16 Ibs) net
26kg (57-5/16 Ibs) (with wooden case)
40mm (21-1/8")
")
486mm (19-1
Fig. 1-1 Dimensions
SERVICE DATA
MECHANICAL
Tape Speed Deviation 3,000Hz + 30Hz
Tape Speed Drift 15Hz
FWD/REV Tape Speed Differential 30Hz
Wow and Flutter
Playback: 0.05% (WRMS), 0.10% (RMS) at 19cm/s
0.07% (WRMS), 0.12% (RMS) at 9.5cm/s
Record/Playback: 0.12% (RMS) at 19cm/s
0.15% (RMS) at 9.5em/s
Pinch Roller Pressure
1.35kg ~ 1.9kg (3.0 Ibs ~ 4.2 Ibs)
Tape Tension
Play mode:
Take-up: 50g +10g (1.402 ~ 2.102)
Supply: 50g 410g (1.402 ~ 2.102)
Fast winding mode
Take-up: 110g #10 (3.502 ~ 4.202)
Supply:
Brake Torque
Forward direction:
1.2 ~1.7kg-cm (17 ~ 240z-inch)
Reverse direction: | 0.6kg-cm (8.307-inch) or less
Left/right deviation:
0.2kg-cm (2.802-inch) or less
Fast Winding Time
80 seconds or less for 550m (1800 feet)
Pitch Control
Standard tape speed +6% or more
FWD/REV Change Time 3.5 sec. 40.5 sec.
TIMER Activate Time 4 sec. +2 sec.
ELECTRICAL
Frequency Response
See Fig. 3-5 to 3-10
Signal to Noise Ratio
Playback: 50dB min. (19cm/s, LH)
524B min, (19cm/s, EE)
49dB min. (9.5cm/s, LH)
52dB min. (9.5cm/s, EE)
Overall: 48dB min. (19cm/s, LH)
50d8 min. (19cm/s, EE)
46dB min. (9.5cm/s, LH)
50dB min. (9.5cm/s, EE)
Overall (dbx):
65dB min. (Both speeds, various tapes)
Erase Efficiency
68dB min. at 1kHz (measured with input
10dB higher than the specified input level)
Channel Separation 50dB min, at 1kHz
Adjacent Track Crosstalk
40dB min, at 125Hz
Total Harmonic Distortion At 1kHz, and at 19cm/s
0.8% or less
0.8% or less (dbx IN)
3% or less (dbx IN + 20VU)