Advertisement
Help Guide
Shotgun Microphone
ECM-M1
When the message "This accessory is not supported by the device and cannot be
used." is displayed on the camera:
Do the following in the listed order.
Make sure that your camera is compatible with this unit.
1
For camera models compatible with this unit, visit the website at:
https://www.sony.net/dics/ecmm1/
Note
In combination with any camera model that is not listed on the above website, the unit does not work.
To use a camera that is not compatible with the digital audio interface in combination with this unit, set the
2
DIGITAL/ANALOG switch on the unit to "ANALOG."
Clean the contacts on this unit and the camera. When either or both of the contacts are soiled with dust or
3
the like, the camera may fail to detect that the unit is attached. To clean the contacts, use a cotton swab or
a dry, soft cloth (e.g., a cleaning cloth). Do not use water or chemicals for cleaning.
Note
Make sure that the DIGITAL/ANALOG switch is slid all the way to either "ANALOG" or "DIGITAL." If the switch is located in
between, this unit may not work properly.
5-053-132-11(1) Copyright 2023 Sony Corporation
26
Advertisement
