Setting The Manufacturer's Code - Sony Trinitron KV-27510 Operating Instructions Manual

Displaying Caption
Vision (CAPTION VISION)
B KV-27S10/27V10/32S10/32S12 only
Some source programs are provided with Caption
Vision (Closed Caption). To display Caption Vision,
select either CC1, CC2, TEXT1, or TEXT2 from the
menu.
CC1 or CC2 shows you a caption, that is a printed
version of the dialog or sound effects of a program.
(The mode should be set to CC1 for most programs.)
TEXT1 or TEXT2 shows you text, that is information
presented using half to full of the screen. It is not
usually related to the program.
MENU
RETURN
A+ or V-
1 Press MENU.
2 Press A+ or V- to select CAPTION VISION and
press RETURN.
(R)
SI
hy
3 Press A+ or V- to select the caption type
and press RETURN.
(R)
si
Shay
Note
¢ Captions may appear with a white box or another error instead
of a certain word. Poor reception of TV programs can also
cause errors in Caption Vision.
RETURN
CAPTION VISION
>{0)/ TEXT OFF
(cr)
(cm
TEXT1
TEXT2
MENU
Use > Exit
1
TEXT1
TEXT2
MENU
Use > Exit
ey eT=1e-1elate male t=fe)
equipment
B KV-27V10/29V11C/29V10M only
You can operate Sony or non-Sony video equipment
that has an infrared remote sensor with the supplied
remote commander. For this operation, set the
manufacturer's code number.
Setting the manufacturer's code
0-9 buttons
CODE SET
While pressing CODE SET, press 0 - 9 to enter
the manufacturer's code number (see the chart
on the next page). For example, to operate a
Sony 8 mm VCR, press 0, 2 and ENTER.
CODE SET
ek:
Operations | 21