Zanussi FJ 1200 Instruction Booklet page 15

Hide thumbs Also See for FJ 1200:
Table of Contents

Advertisement

Suppose you have 2 kg of synthetic fabric laundry to
wash. They are rather delicate fabrics and should not be
washed at a high temperature.
1 Load the laundry
Open the door by pulling
the catch outward.
Load the items one at a
time and close the door.
2 Measure out the detergent
Pull out the detergent dispenser drawer from the control
panel. Measure out the amount of detergent required
and pour into the main wash compartment.
If you wish to carry out a prewash, pour the amount of
detergent required into the "prewash" compartment.
3 Add the fabric softener if required
Pour the fabric softener, if
required, into the com-
partment marked L®J.
Do not exceed the MAX
level and then close the
drawer gently.
P0226
Depress the programme
selector dial to release and
then turn it to the required programme. The machine will
emit an audible bleep and the lights corresponding to the
chosen programme will illuminate.
5 To choose the required options
-
To gain access to the dif-
ferent push-buttons, open
the programme
option
cover by depressing the
cover button, and select
the required option. Con-
firmation of your selection
will be indicated by an au-
dible bleep and the rel-
:
evant light will illuminate.
If you wish to reduce the spin speed which has been
pre-selected, depress the relevant button until the light
corresponding to the spin speed required illuminates.
6 Start the machine
Before starting up the machine check that:
«
the appliance is plugged in
=
the water supply taps are turned on
=
the drain hose is correctly and securely positioned
=
the door and the detergent dispenser drawer are
closed.
Depress
the
START/
PAUSE button for approx
3 secs until the audible
sound
stops, then
re-
lease. The programme
will then commence.
NOTE: There may be a delay of up to 30 secs from
releasing the button
until the programme
com-
mences during which time the door locked light
may flash.
7 At the end of the programme
The machine will stop with the water left in drum.
The "RINSE" light will flash.
Ensure that the spin speed you require has been
selected, if not, reselect.
To switch the machine off turn the programme selector
dial to "OFF". All the lights will go out, including the door
locked light.
15

Advertisement

Table of Contents
loading

Table of Contents