IRiver B30 Operating Instructions Manual page 13

Connecting
Inserting/Removing the Micro SD Card
1. While the product is off, open the cover at the bottom
of the product and lightly push the Micro SD card into
the slot in the same direction as in the image.
2. Press the Micro SD card again to remove it.
While the product is off, insert/remove tne Micro SD card.
Do not insert the Micro SD card with force.
This may cause product malfunction and damage to the Micro SD card
Never remove the Micro SD card while in use. This may cause data to be
deleted, product malfunction and damage to the Micro SD card
Do not insert/remove the Micro SD card frequently
if the Micro SD card Is inserted improperly, then the product may malfunction
and the card may be difficult to remove
12 Basic Operations
Recommended Micro SD Card
SanDisk, Transcend
Using a Micro SD card other than the recommended one may cause malfunction.
The transfer speed of the Micro SD card may vary depending on your PC.
Micro SD card cannot be formatted using the product.
Always format the card using iriver plus 3 or a card reader.
Formatting the Micro SD Card will delete all data within the card therefore,
itis important to backup data before formatting,
FAT system is recommended when formatting the Micro SD Card,
Try to format the cara if the Micro SD Card cannot be recognized or causes malfunction.
The Micro SD Card is not included with the product, Please purchase one separately,
A Micro SD Card of 8 GB is recommended for this product.