Table of Contents
Advertisement
Viotech 3200+ BIOS Manual
3 PCIPnP Menu
This section describes configuring the PCI bus system. PCI, or Personal Computer
Interconnect, is a system which allows I/O devices to operate at speeds nearing the
speed of the CPU itself uses when communicating with its own special components.
Notice
Beware of that setting inappropriate values in items of this menu may cause
system to malfunction.
PCIPnP
Main
Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Clear NVRAM
Plug & Play O/S
PCI Latency Timer
Allocate IRQ to PCI VGA
Palette Snooping
PCI IDE BusMaster
> PCI Resource
vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc.
Clear NVRAM
This item allows you to clear the data in the NVRAM (CMOS) by selecting "Yes".
Options:
No (Default) / Yes
Plug & Play OS
When set to YES, BIOS will only initialize the PnP cards used for the boot sequence
(VGA, IDE, SCSI). The rest of the cards will be initialized by the PnP operating
system like Window™ 95. When set to NO, BIOS will initialize all the PnP cards.
For non-PnP operating systems (DOS, Netware™ ), this option must set to NO.
Options:
No (Default) / Yes
BIOS SETUP UTILITY
Boot
Chipset
Performance
[No]
[No]
[64]
[Yes]
[Disabled]
[Enabled]
15
Exit
Clear NVRAM during
System Boot.
Select Screen
Select Item
Change Option
+-
F1
General Help
Save and Exit
F10
Exit
ESC
Advertisement
Table of Contents
