TP-Link Omada ER706W Installation Manual page 4

English
1. Check the grounding and stability of the rack.
2. Secure the supplied rack-mounting brackets to each
side of the device with supplied screws.
3. Af ter the brackets are at tached to the device, use
suitable screws (not provided) to secure the brackets to
the rack.
Typical Network Topology
For Hardware Controller
■
A DHCP ser ver (t ypically a router) with DHCP function
enabled is required to assign IP addresses to the EAPs and
2
Rackmounting
Bracket
Screw
Rack