Ami Bios Beep Code; Troubleshooting - Biostar B760NH-E Manual

4.2 AMI BIOS Beep Code

Boot Block Beep Codes
Number of Beeps
Continuing
POST BIOS Beep Codes
Number of Beeps
1
8

4.3 Troubleshooting

CPU Overheated
If the system shutdown automatically after power on system for seconds, that means the CPU
protection function has been activated.
When the CPU is over heated, the motherboard will shutdown automatically to avoid a
damage of the CPU, and the system may not power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data. (See "Close CMOS Header: JCMOS1" section)
2. Wait for seconds.
3. Power on the system again.
Description
Memory sizing error or Memory module not found
Description
Success booting.
Display memory error (system video adapter)
B760NH-E
Chapter 4: Useful help | 27