Siemens LMV5 Series Manual page 2

Standards and certificates

2/29
Building Technologies Division
Applied directives:

Low-voltage directive

Directive for gas-fired appliances

Directive for pressure devices

Electromagnetic compatibility EMC
(immunity) *)
*) The compliance with EMC emission requirements must be checked after the burner management
system is installed in equipment
Compliance with the regulations of the applied directives is verified by the adherence to
the following standards / regulations:

Automatic burner control systems for burners and
appliances burning gaseous or liquid fuels

Safety and control devices for gas burners and gas
burning appliances - Valve proving systems for
automatic shut-off valves

Gas/air ratio controls for gas burners and gas burning
appliances
Part 2: Electronic types

Safety and control devices for gas burners and gas burning
appliances - General requirements

Safety and control devices for gas and/or oil burners and
gas and/or oil appliances -- Particular requirements
Part 1: Fuel-air ratio controls, electronic type

Automatic electrical controls for household and similar use
Part 2-5:
Particular requirements for automatic electrical burner
control systems
The relevant valid edition of the standards can be found in the declaration of
conformity!
Note on DIN EN 60335-2-102
Household and similar electrical appliances - Safety - Part 2-102:
Particular requirements for gas, oil and solid-fuel burning appliances having electrical
connections.
The electrical connections of the LMV5 and the PLL5 comply with the requirements of
EN 60335-2-102.
EAC Conformity mark (Eurasian Conformity mark)
ISO 9001:2008
ISO 14001:2004
OHSAS 18001:2007
China RoHS
Hazardous substances table:
http://www.siemens.com/download?A6V10883536
2014/35/EC
2009/142/EC
2014/68/EC
2014/30/EC
DIN EN 298
DIN EN 1643
DIN EN 12067-2
DIN EN 13611
ISO 23552-1
DIN EN 60730-2-5
CC1N7550en
22.05.2017