Samsung RS22T55 Series User Manual page 31

STEP 2 Flooring
NOTE
If the refrigerator cannot pass through the entrance due to its size, see the STEP 3 Door
removal for entrance section.
Untitled-14 31
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each leg of the
refrigerator when you move it for
installation.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpets along the movement path.
English 31
2019-12-17 PM 4:16:49