Asus TUF GAMING B450M-PLUS II Manual page 13

Hide thumbs Also See for TUF GAMING B450M-PLUS II:
Table of Contents

Advertisement

For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a
minimum power of 350W.
We recommend that you use a PSU with a higher power output when configuring a
system with more power-consuming devices. The system may become unstable or
may not boot up if the power is inadequate.
If you are uncertain about the minimum power supply requirement for your system, we
recommend you to refer to online resources for Power Supply Wattage Calculator.
6. M.2 Slot (Key M)
The M.2 slot allows you to install an M.2 device such as an M.2 SSD module.
For 3
/2
rd
Graphics, M.2 slot supports PCIe 3.0 x4 and SATA modes M Key design and type
2242/2260/2280/22110 storage devices.
For AMD Athlon™ with Radeon™ Vega Graphics Processors, M.2 slot supports SATA
mode M Key design and type 2242/2260/2280/22110 storage devices.
The M.2 slot shares bandwidth with SATA6G_56. When the M.2 slot is populated,
SATA6G_56 will be disabled.
7. SATA 6Gb/s ports
The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and
hard disk drives via a SATA cable.
8. USB 3.2 Gen 1 header
The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen
1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1
header provides data transfer speeds of up to 5 Gb/s.
The USB 3.2 Gen 1 module is purchased separately.
9. USB 2.0 headers
The USB 2.0 headers allow you to connect a USB module for additional USB
2.0 ports. The USB 2.0 headers provide data transfer speeds of up to 480 Mb/s.
DO NOT connect a 1394 cable to the USB connectors. Doing so will
damage the motherboard!
The USB 2.0 module is purchased separately.
10. AURA RGB header
The RGB header allows you to connect RGB LED strips.
The RGB header supports 5050 RGB multi-color LED strips (12V/G/
R/B), with a maximum power rating of 3A (12V), and no longer than 3m.
Before you install or remove any component, ensure that the ATX power supply is switched
off or the power cord is detached from the power supply. Failure to do so may cause severe
damage to the motherboard, peripherals, or components.
ASUS TUF GAMING B450M-PLUS II
https://tm.by
Интернет-магазин TM.by
/1
Gen AMD Ryzen™/ 2
nd
st
nd
and 1
Gen AMD Ryzen™ with Radeon™ Vega
st
IntA_P2_SSRX-
IntA_P2_SSRX+
IntA_P2_SSTX-
IntA_P2_SSTX+
PIN 1
USB3+5V
USB3+5V
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
GND
IntA_P1_D-
IntA_P2_D-
IntA_P1_D+
IntA_P2_D+
GND
PIN 1
1-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents