Cisco AIR-AP1832I K9C Series Getting Started Manual page 4

Model numbers ending in C are, by default, factory-shipped with a Cisco Mobility Express software
image. For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_Guid
e.html
Access Point Features
The features of the 1830 series access points are:
• Supported mode(s) of operation:
Centralized
–
Sniffer
–
FlexConnect
–
OfficeExtend
–
MESH
–
–
–
• Supports Cisco Mobility Express solution. The 1830 series access point can operate as a master
AP (having an integrated wireless controller functionality) in a Cisco Mobility Express network.
For more information, see the Cisco Mobility Express User Guide at the following URL:
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/1/user_guide/b_ME_User_
Guide.html
• Radio features supported are:
2.4 GHz and 5 GHz concurrent radios
–
2 GHz radio with 3TX x 3RX and two spatial streams SU-MIMO
–
5 GHz radio with 3TX x 3RX 802.11ac Wave 2 capable with two spatial streams SU-MIMO
–
and MU-MIMO
802.11ac based Transmit Beamforming
–
Quality of Service (QoS)
–
Radio Resource Management (RRM)
–
Rogue Detection
–
BandSelect
–
• The AP supports the following hardware external interfaces:
RS-232 Console Interface through RJ-45
–
4