Advertisement
Adjustment
tion
the deflecting yoke.
Use four wedges of a X-form
and set them
respectively at an interval of about 90°.
The
wedges should be fixed to the Brown tube using
silicon bond (KE4866)
11. The clamp screw of the deflecting yoke should be
clamped firmly with and adequate torque.
. Input the cross hatch signal.
оге
P
- Overlap the red and blue lings at the center of the
screen
with 4-pole magnet
to turn the color to
Magenta color (red/blue).
=
Turn together while
. Next, overlap the Magenta color (red/blue) and
v4 Дед,
ће
|
1
angle
of the
A
at the center of the screen with 6-pole
`
рады
„ Repeat
the Steps 2 and 3, and adjust the
convergence of the vertical and horizontal lines at
the center of the screen.
Advertisement
