Craftsman FRONT TINE TILLER 917.29239 Owner's Manual page 5

Your new tiller has been assembled at the
factory with exception of those parts left
unassembled for shipping purposes. To
ensure safe and proper operation of your
tillre all parts and hardware you assemble
must be tightened securely. Use the correct
tools as necessary to insure proper tight-
heSS.
TOOLS REQUIRED FOR ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes are listed.
(1) Utility knife
(1) Pair of pliers
(2) 1/2" wrenches
OPERATOR'S POSITION
When right or left hand is mentioned in
this manual, it means when you are in
the operating position (standing behind
tiller
handles).
Left
Front
Operator's Position
Right
CONTENTS OF HARDWARE PACK
(1) Manual
(2) Lock
Washers 5/16
Q
(2) Flange Locknuts
5/16-18 UNC
©
(2) Hex Nuts
5/16-18
(1) Plastic
Cable Clip
(2) Hex Bolts
5/16-18 x 1-1/4
(1) Bottle Engine Oil
(2) Carriage Bolts 5/16-18 UNC x 2-3/8 Gr. 5
5